Power Analyzers

Product Details:

Analyzer measures and records according to the IEC 61000-4-30 class S standard. Our products are in great demand including Power Analyzer.

Features:

• power to the analyzer is supplied from tested mains (internal power supply) and is used in all types of networks from 64 V to 760 V, with particular emphasis on measurements at low voltage poles, due to the ease of connection,
• has an independent power supply socket, especially suited for voltage measurements for transformers and DC circuits,
• built-in real-time clock.

Possible measurements:

• Measurements according to EN 50160,
• Voltage L1, L2, L3,
  - average, minimum, maximum and instantaneous values, range to 760 V, ability to work with voltage transformers,
• Current L1, L2, L3, N (four inputs),
  - average, minimum, maximum and instantaneous values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers,
• Crest factor for voltage and current,
• Frequency from 40 Hz to 70 Hz ,
• Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
• Power recording:
  - Budeanu method,
  - IEEE 1459,
• Active, reactive, apparent energy,
• Power factor, cosφ, tgφ,
• Up to 40th harmonics for voltage and current,
• Total Harmonic Distortion (THD) for voltage and current,
• Short-term (PST) and long-term (PLT) flicker,
• Unbalance of voltage and current,
• Current and voltage events registration including waveforms and RMS graphs half period.

Additional Information:

• Item Code: PQM700

Product Details:

Power Quality Analyzer

PQM-710 power quality analyzer is an advanced product for wide type of measurements, analysis and recording of network parameters 50/60 Hz and the power quality diagnostic according to European standard EN.

PQM-710 is an innovative model with a wireless communication Wi-Fi , which allows for automatic pairing with the included tablet, with a large 10" touch screen.

Tablet allows full operating of the analyzer, live data preview and the reading and analysis of data stored in the internal memory.

With this solution, the PQM-710 is an unique device that combines the advantages of the analyzer with built-in display and typical portable analyzers (known as Black Boxes).

With the tablet you can very fast checked the device under test. On the other hand, you can leave the analyzer module for multi-measurements as a typical logger without display.

You can very fast diagnose the machine under test using the tablet. On the other hand, you can leave the analyzer module itself for many days measurement as a typical logger without display.

Analyzer is addressed to a wide range of users who need to control the power quality with a mobile device, it meets the IEC 61000 standards for the Class A.

Compliance with the standard includes measurement uncertainty, measurement methods and time synchronization with a reference signal. In case of using analyzer indoor with poor GPS signal additional antenna with 10 meters cable can be used.

After placing antenna outside the GPS signal will be easily traced and used for internal clock synchronization.

In practice, the analyzer may be used with all network types with rated voltage from 110 V to 760 V, directly or indirectly via transducers. It works in the following networks:

It works in the following networks:

• one-phase,
• split-phase with N wire,
• three-phase Wye type, with and without N wire,
• three-phase delta type,
• with constant voltage.

Thanks to these features PQM-710 can be used in power industry and industrial maintenance services, as well as in companies leading network analysis services.

Additional Information:

• Item Code: PQM-710

Product Details:

Power Quality Analyzer

PQM-711 power quality analyzer is an advanced product for wide type of measurements, analysis and recording of network parameters 50/60 Hz and the power quality diagnostic according to European standard EN 50160.

PQM-711 is an innovative model with a wireless communication Wi-Fi , which allows for automatic pairing with the included tablet, with a large 10" touch screen.

Tablet allows full operating of the analyzer, live data preview and the reading and analysis of data stored in the internal memory.

With this solution, the PQM-711 is an unique device that combines the advantages of the analyzer with built-in display and typical portable analyzers (known as Black Boxes).

With the tablet you can very fast checked the device under test. On the other hand, you can leave the analyzer module for multi-measurements as a typical logger without display. You can very fast diagnose the machine under test using the tablet.

On the other hand, you can leave the analyzer module itself for many days measurement as a typical logger without display.

PQM-711 has a transient registration with a maximum sampling rate of 10 MHz (rapid changes in voltage) and control signals.

The minimum duration of the registered transient is 650 ns. Analyzer is addressed to a wide range of users who need to control the power quality with a mobile device, it meets the IEC 61000 standards for the Class A.

Compliance with the standard includes measurement uncertainty, measurement methods and time synchronization with a reference signal. In case of using analyzer indoor with poor GPS signal additional antenna with 10 meters cable can be used.

After placing antenna outside the GPS signal will be easily traced and used for internal clock synchronization.

Thanks to these features PQM-711 can be used in power industry and industrial maintenance services, as well as in companies leading network analysis services.

In practice, the analyzer may be used with all network types with rated voltage from 110 V to 760 V, directly or indirectly via transducers. It works in the following networks:

• It works in the following networks:
• one-phase,
• split-phase with N wire,
• three-phase Wye type, with and without N wire,
• three-phase delta type,
• with constant voltage.

Additional Information:

• Item Code: PQM-711

Product Details:

Power Quality Analyzer Sonel PQM-707 is an autonomous meter allowing for versatile measurement, analysis, and registration of energy networks parameters DC and 50/60Hz, including the quality of electric energy in accordance with the European standard EN 50160 and the Regulation of the Minister of Economy on detailed conditions of the  electro-energetic system functioning. All parameters are measured in the S class of the IEC 61000-4-30 STANDARD guaranteeing high accuracy of measurements.
The largest in this class of analyzers 7-inch colour touch screen enables intuitive and ergonomic operation. Thanks to the built-in lithium-ion battery, the analyzer allows for efficient work during the measurement without the necessity of connecting an external AC adapter.

The analyzer is directed to a very wide range of users, with particular reference to the maintenance staff. Due to its mobility and autonomy, any problems occurring in the supply networks can be diagnosed on the spot. High measurement category (CAT IV 600V) makes the analyzer very safe, which provides peace of mind during every day use.
The analyzer can be used in virtually all kinds of networks with rated voltage from 54V to 760V directly, or indirectly via transformers.
Because of that PQM-707 can be used in the field of professional power engineering, maintenance services in industrial plants, as well as among those providing services focused on network analysis.

Features:

• 7" touch screen - intuitive operating
• CAT IV 600V - high safety
• all parameters acc. to class S - high accuracy of measurements
• Li-Ion rechargeable battery - higher mobility
• removable memory card - recording data with no restrictions

Possible measurements:

• Measurements according to EN 50160,
• Voltage L1, L2, L3, N-PE (five inputs),
  - average, minimum, maximum values, range to 760 V, ability to work with voltage transformers,
• Current L1, L2, L3, N (four inputs),
  - average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers,
• Crest factor for voltage and current,
• Frequency from 40 Hz to 70 Hz ,
• Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
• Power recording:
  • Budeanu method,
  • IEEE 1459,
• Active, reactive, apparent energy,
• Power factor, cosφ, tgφ,
• Up to 50th harmonics for voltage and current,
• Total Harmonic Distortion (THD) for voltage and current,
• Short-term (PST) and long-term (PLT) flicker,
• Unbalance of voltage and current,
• Current and voltage events registration including waveforms and RMS graphs half period,
• Inrush current
• Calculator of energy tariffs
• ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.

Additional Information:

• Item Code: 707

Product Details:

• power to the analyzer is supplied from tested mains (internal power supply) and is used in all types of networks from 64 V to 760 V,
• with particular emphasis on measurements at low voltage poles, due to the ease of connection.
• has an independent power supply socket, especially suited for voltage measurements for transformers and DC circuits.
• remote control and data transfer through a built-in GSM modem (GPRS),
• anti-theft feature - SMS notification in the event of position change - built-in GPS receiver,
• real-time clock synchronized to GPS protocol.
• Measurement of external temperature in range -55°C…125°C

Additional Information:

• Item Code: 702T