Electrical Safety Equipment

Product Details:

PAT-806 digital meters are used to measure the parameters of portable electrical equipment (power tools, white goods, etc.) which determine their safety: resistance of protective conductors, insulation resistance, continuity of connections, leakage current, power. Specifically the instrument is dedicated to measure the welding equipment.

PAT-806 can be used to test the equipment performed in accordance with standards:

• EN 60974-4: Arc welding equipment - Part 4: Periodic inspection and testing.
• EN 60745-1: Hand-held motor-operated electric tools. Safety. General requirements.
• EN 61029: Safety of transportable motor-operated electric tools. General requirements.
• EN 60335-1: Household and similar electrical appliances -Safety -Part 1: General requirements.
• EN 60950: Safety of information technology equipment (IT Equipment).
• VDE 0404-1: Prüf- und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 1: Allgemeine Anforderungen.
• VDE 0404-2: Prüf- und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 2: Prüfeinrichtungen für Prüfungen nach Instandsetzung, Änderung oder für Wiederholungsprüfungen.
• VDE 0701-0702 Prüfung nach Instandsetzung, Änderung elektrischer Geräte. Wiederholungsprüfung elektrischer Geräte. Allgemeine Anforderungen für die elektrische Sicherhei.

Additional Information:

• Item Code: PAT806

Product Details:

PAT-815 digital meter is used to measure the parameters of electrical equipment (power tools, white goods, etc.) which determine their safety: resistance of protective conductors, insulation resistance, continuity of connections, leakage current, power, automatic measurement of all RCD parameters.

 

PAT-815 can be used to test the equipment performed in accordance with standards:

 

• EN 60745-1 Hand-held motor-operated electric tools. Safety. General requirements
• EN 61029 Safety of transportable motor-operated electric tools - General requirements
• EN 60335-1 Household and similar electrical appliances -Safety -Part 1: General requirements
• EN 60950 Safety of information technology equipment (IT Equipment)
• AS/NZS 3760:2010 In-service safety inspection and testing of electrical equipment
• VDE 0404-1 Prüf - und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 1: Allgemeine Anforderungen
• VDE 0404-2 Prüf - und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 2: Prüfeinrichtungen für Prüfungen nach Instandsetzung, Änderung oder für Wiederholungsprüfungen
• VDE 0701-0702 Prüfung nach Instandsetzung, Änderung elektrischer Geräte. Wiederholungsprüfung elektrischer Geräte. Allgemeine Anforderungen für die elektrische Sicherheit

Additional Information:

• Item Code: PAT-815

Product Details:

PAT-820 digital meter is used to measure the parameters of electrical equipment (power tools, white goods, etc.) which determine their safety: resistance of protective conductors, insulation resistance, continuity of connections, leakage current, power, automatic measurement of all RCD parameters. Meter allows fash test/high voltage test.

PAT-820 can be used to test the equipment performed in accordance with standards:

 

• EN 60745-1 Hand-held motor-operated electric tools. Safety. General requirements
• EN 61029 Safety of transportable motor-operated electric tools - General requirements
• EN 60335-1 Household and similar electrical appliances -Safety -Part 1: General requirements
• EN 60950 Safety of information technology equipment (IT Equipment)
• AS/NZS 3760:2010 In-service safety inspection and testing of electrical equipment
• VDE 0404-1 Prüf - und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 1: Allgemeine Anforderungen
• VDE 0404-2 Prüf - und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 2: Prüfeinrichtungen für Prüfungen nach Instandsetzung, Änderung oder für Wiederholungsprüfungen
• VDE 0701-0702 Prüfung nach Instandsetzung, Änderung elektrischer Geräte. Wiederholungsprüfung elektrischer Geräte. Allgemeine Anforderungen für die elektrische Sicherheit

Additional Information:

• Item Code: PAT-820

Product Details:

The Sonel PAT-820 electrical equipment safety meter is used for measuring the parameters of electrical equipment, including power tools and household appliances, as well as parameters which determine their safe use - resistance of protective conductors, insulation resistance, continuity of connections, leakage currents, power and parameters of RCD switches. The meter presented here is additionally equipped with the Flash test / high voltage test function. The device is intended especially for facility maintenance departments, maintenance services, service companies performing measurements of power tool parameters, hotels and public institutions. The PAT range of meters is proving its worth in areas where ensuring the safe use of power tools is one of the key elements in protecting the user from electrical shock. 

Data transfer:

• serial number prefix BJ: USB 2.0, Wi-Fi,
• serial number prefix MF: USB 2.0.

Product features:

• advanced measuring unit enabling measurements of:
  • protective conductor resistance
  • of insulation resistance
  • of RCD circuit breaker parameters
  • of equivalent leakage current,
  • of differential leakage current,
  • of touch leakage current
  • of power
  • of power consumption
  • IEC cable test
  • of mains voltage and frequency.
  • flashtest - high voltage test
• a very intuitive user interface
• support for label printer and QR code scanner
• have duty housing (with IP67 flap closed)
• clear colour touchscreen

Application:

• Digital PAT-820 meter is designed for parameter measurements of all kinds electrical devices, such as power tools, household appliances, etc. The device is dedicated to the facility maintenance departments, companies providing power tool measurement services, hotels and public institutions services. PAT should be used in every place where the safety of using power tools is one of the inseparable elements of taking care of the user’s safety against electric shock.

Device capabilities:

• The PAT-820 device thanks to the advanced measuring unit enables comprehensive testing of power tools. Due to the expanded interface, it enables the recording of large amounts of measurement data, and the use of additional functions to facilitate work. Support for QR code scanner, label printer or communication with PC is not a problem. The measurements are carried out in an intuitive and widely configurable manner.

Intuitive operation:

• The large, touch screen and graphic layout makes work on the device is intuitive and pleasant. The built-in help guides the user when building the correct measurement system. The work related to data records is based on a tree- structure memory that enables the construction of a transparent and extensive database.

Have duty housing:

• Durable case with IP67 protection (with closed lead). It provides reliability during measurement, transport and storage.

Product Details:

Safety of welding machines outright Ensure safe use of welding and electrical equipment with the Sonel PAT-86 electrical equipment safety meter.

The Sonel PAT-86 advanced meter is perfect for control measurements of welding machines and other electrical devices. The instrument allows to measure parameters having an impact on the safe use of the equipment, such as resistance of protective conductors, insulation resistance, continuity of connections, leakage currents, power, RCD and PRCD. The PAT-86 model is especially dedicated to testing welding equipment according to the EN 60974-4 standard. It allows, among other things, to check the rated voltage of welding equipment in no-load condition, the welding circuit leakage current and the primary leakage current.

The Sonel PAT-86 electrical equipment safety meter will come in handy in those areas where safety is of particular importance. Reliable wherever welders, power tools, three-phase appliances or domestic appliances need to be inspected.

Features:

• Extensive measuring system enables:
  • measurement of welding equipment parameters:
    • rated voltage of welding devices in no-load condition,
    • welding circuit leakage current,
    • primary leakage current,
  • protective conductor resistance measurement,
  • residual voltage measurement,
  • measurement of insulation resistance in three points,
  • measurement of substitute, differential and touch leakage current,
  • functional test,
  • test of RCD and PRCD switches,
  • ...and much more.
• Intuitive user interface.
• Cooperation with a label printer and QR code scanner.
• Robust, compact housing.
• Operation time at rechargeable battery power supply: up to 1 hour.

Application:

• PAT-86 is used wherever safety is the most important thing. Ideally suited to situations where it is necessary to check welders, power tools, three-phase devices and household appliances.

Welders:

• PAT-86 was created for testing welding equipment in compliance with EN 60974-4 standard.

Capabilities:

• Thanks to the extensive measuring part, PAT-86 enables comprehensive checking of electrical devices. The touch screen and autoprocedures section make testing quick and efficient.

The meter cooperates with a label printer and QR scanner, which greatly facilitates the recordkeeping of tools. The following printouts are available:

• initial measurement report,
• QR code, where information on performed tests and the parameters of the tested device are saved. These data can be read and added to the meter memory using the optional QR code scanner.

The whole picture is complemented by a compact and durable housing. It provides instrument protection during both measurements and transport.

Memory:

• The memory has a tree structure. For each device tested it contains its description, location of measurements, customer data and registration number.

Communication:

• The meter provides many modes of transmission of measurement results: via USB, LAN and WiFi. In addition, it is possible to upload the results to a USB stick.
• Dedicated PAT Analysis software allows for data management and also reports preparation - in several versions, depending on the user’s needs. In addition, it is possible to use the PAT Server solution. 

This system allows you to work in many modes, including:

• smooth data management,
• online upload to server,
• work through a web browser,
• work in task ordering mode,
• storing copies of data on the server.

Product Details:

The PAT-10 meter is an innovative combination of small dimensions (and the associated full mobility) with advanced measuring systems, allowing fully automatic measurements of electrical equipment, IEC cables and extension cords - also those with PRCD.

A set of tests is performed with a single press of the START button. The configuration possibilities allow the modification of the meter's operation and, consequently, even better adaptation to the user's needs.

PAT instruments are equipped with a manual measurement mode. It is useful in situations where a unit test is sufficient instead of a complex measurement procedure.

All instruments allow basic tests to be performed without an external power supply: simplified test sets are available in battery operation mode.

Small size, low weight and a specially designed case for the meter and accessories ensure both comfort of use and high mobility. Wireless communication with the printer allows you to organise your measurement site in any way you like without tangled wires. The recording of results into memory and their integration into PC software further extends the functionality of the instruments.

Features:

• LED test results indication
• quick access to the measurement procedures
• compact design and ergonomic soft case
• automatic measurement range selection
• measurement of protective conductor resistance with the currents: 200 mA, 10 A
• insulation resistance measurement 250 V, 500 V
• PRCD trip time testin
• measurement of equivalent, touch and differential leakage current
• measurement of mains voltage
• IEC lead test
• saving results to the memory
• printing labels with measurement results (option)
• works with software: Sonel Reader and Sonel PAT Analysis
• works with Sonel PAT Analysis Mobile application

Capabilities:

• The PAT-10 meter is an innovative combination of small dimensions (allowing full mobility) with advanced measuring systems, providing fully automatic measurements of electrical devices, IEC cables and extension cords - also those with PRCD.
• A set of tests is made with just one press of the START button. Configuration options allow to modify meter’s work mode, and thus - to better tailor it to user’s needs.
• PAT instrument is equipped with a manual measurement mode. It is useful in situations where individual test is sufficient instead of a complex measurement sequence.
• All instruments enable basic tests without external power supply: simplified test sets are available in battery mode.
• Small dimensions, light weight and a specially designed bag for the meter and accessories provide both convenience and high mobility. Wireless communication with the printer allows free measurement place arrangement without tangled wires. Meter’s memory and integration with PC software additionally extends the functionality of the instruments.

Product Details:

We are engaged in offering PAT-806-IT Portable Appliance Tester to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

PAT-815 digital meter is used to measure the parameters of electrical equipment (power tools, white goods, etc.) which determine their safety: resistance of protective conductors, insulation resistance, continuity of connections, leakage current, power, automatic measurement of all RCD parameters.

PAT-815 can be used to test the equipment performed in accordance with standards:

• EN 60745-1 Hand-held motor-operated electric tools. Safety. General requirements
• EN 61029 Safety of transportable motor-operated electric tools - General requirements
• EN 60335-1 Household and similar electrical appliances -Safety -Part 1: General requirements
• EN 60950 Safety of information technology equipment (IT Equipment)
• AS/NZS 3760:2010  In-service safety inspection and testing of electrical equipment
• VDE 0404-1 Prüf - und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 1: Allgemeine Anforderungen
• VDE 0404-2 Prüf - und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 2: Prüfeinrichtungen für Prüfungen nach Instandsetzung, Änderung oder für Wiederholungsprüfungen
• VDE 0701-0702 Prüfung nach Instandsetzung, Änderung elektrischer Geräte. Wiederholungsprüfung elektrischer Geräte. Allgemeine Anforderungen für die elektrische Sicherheit

Product Details:

Comprehensive measurements of electrical equipment are possible with e.g. the Sonel PAT-85 electric equipment safety meter The Sonel PAT-85 compact meter is a proven tool for measuring the parameters of electrical equipment which have an impact on safe use: resistance of protective conductors, insulation resistance, continuity of connections, leakage currents, power as well as RCD and PRCD circuit breakers. The meter performs flawlessly in areas where safety is of paramount importance. It is particularly useful in situations where there is a need for a quick check of power tools, three-phase equipment or white goods.

Features:

• Extensive measuring system enables:
  • protective conductor resistance measurement using current: 200 mA, 10 A and 25 A,
  • measurement of insulation resistance using voltage: 100 V, 250 V, 500 V and 1000 V,
  • measurement of substitute, differential and touch leakage current,
  • functional test,
  • test of RCD and PRCD switches,
  • ...and much more.
• Intuitive user interface.
• Cooperation with a label printer and QR code scanner.
• Robust, compact housing.
• Operation time at rechargeable battery power supply: up to 1 hour

Application:

• The device is used wherever safety is the most important thing. Ideally suited to situations where it is necessary to check welders, power tools, three-phase devices and household appliances.

Capabilities:

• Thanks to the extensive measuring part, the device enables comprehensive checking of electrical devices. The touch screen and autoprocedures section make testing quick and efficient.

The meter cooperates with a label printer and QR scanner, which greatly facilitates the recordkeeping of tools. The following printouts are available:

• initial measurement report,
• QR code, where information on performed tests and the parameters of the tested device are saved.

These data can be read and added to the meter memory using the optional QR code scanner.

The whole picture is complemented by a compact and durable housing. It provides instrument protection during both measurements and transport.

Memory:

• The memory has a tree structure. For each device tested it contains its description, location of measurements, customer data and registration number.

Communication:

The meter provides many modes of transmission of measurement results: via USB, LAN and WiFi. In addition, it is possible to upload the results to a USB stick. Dedicated PAT Analysis software allows for data management and also reports preparation - in several versions, depending on the user’s needs. In addition, it is possible to use the PAT Server solution. This system allows you to work in many modes, including:

• smooth data management,
• online upload to server,
• work through a web browser,
• work in task ordering mode,
• storing copies of data on the server.

Product Details:

The Sonel PAT-80 electrical equipment safety testers are used to test the safety of power tools. With its capabilities, you will test key components of an electrical appliance that are responsible for its safety. The PAT-80 compact meter is a proven tool for measuring the resistance of a protective conductor with a current of 200 mA or the insulation resistance with a voltage of 250 V and 500 V.

The instrument is used wherever safety is paramount. It is ideal for situations where you need to check power tools, three-phase appliances or white goods.

Features:

• Extensive measuring system enables:
  • protective conductor resistance measurement using current: 200 mA,
  • measurement of insulation resistance using voltage: 250 V and 500 V 
  • measurement of substitute, differential and touch leakage current,
  • functional test,
  • test of RCD and PRCD switches,
  • ...and much more.
• Intuitive user interface.
• Cooperation with a label printer and QR code scanner.
• Robust, compact housing.
• Operation time at rechargeable battery power supply: up to 1 hour

Application:

• The device is used wherever safety is the most important thing. Ideally suited to situations where it is necessary to check welders, power tools, three-phase devices and household appliances.

Capabilities:

• Thanks to the extensive measuring part, the device enables comprehensive checking of electrical devices. The touch screen and autoprocedures section make testing quick and efficient.

The meter cooperates with a label printer and QR scanner, which greatly facilitates the recordkeeping of tools. The following printouts are available:

• initial measurement report,
• QR code, where information on performed tests and the parameters of the tested device are saved.

These data can be read and added to the meter memory using the optional QR code scanner. The whole picture is complemented by a compact and durable housing. It provides instrument protection during both measurements and transport.

Memory:

• The memory has a tree structure. For each device tested it contains its description, location of measurements, customer data and registration number.

Communication:

The meter provides many modes of transmission of measurement results: via USB, LAN and WiFi. In addition, it is possible to upload the results to a USB stick. Dedicated PAT Analysis software allows for data management and also reports preparation - in several versions, depending on the user’s needs. In addition, it is possible to use the PAT Server solution. This system allows you to work in many modes, including:

• smooth data management,
• online upload to server,
• work through a web browser,
• work in task ordering mode,
• storing copies of data on the server.

Product Details:

The Sonel PAT-2E mobile electrical equipment safety meter surprises with its compact dimensions and combines full mobility and advanced measuring circuits, due to which it allows to carry out fully automatic measurements of electrical equipment, IEC cables and extension cords, including those with PRCD. With a single START button, a full set of tests can be performed. In addition, Sonel PAT-2E has extensive configuration capabilities which enable modification of the device's operation and optimal adjustment to the user's requirements.

Features:

• LED test results indication
• quick access to the measurement procedures
• compact design and ergonomic soft case
• automatic measurement range selection
• measurement of protective conductor resistance with the currents: 200 mA
• insulation resistance measurement 250 V, 500 V
• PRCD trip time testin
• measurement of equivalent, touch and differential leakage current
• measurement of mains voltage
• IEC lead test
• saving results to the memory
• printing labels with measurement results (option)
• works with software: Sonel Reader and Sonel PAT Analysis
• works with Sonel PAT Analysis Mobile application

Capabilities:

• The PAT-2E meter is an innovative combination of small dimensions (allowing full mobility) with advanced measuring systems, providing fully automatic measurements of electrical devices, IEC cables and extension cords - also those with PRCD.
• A set of tests is made with just one press of the START button. Configuration options allow to modify meter’s work mode, and thus - to better tailor it to user’s needs.
• PAT instrument is equipped with a manual measurement mode. It is useful in situations where individual test is sufficient instead of a complex measurement sequence.
• All instruments enable basic tests without external power supply: simplified test sets are available in battery mode.
• Small dimensions, light weight and a specially designed bag for the meter and accessories provide both convenience and high mobility. Wireless communication with the printer allows free measurement place arrangement without tangled wires. Meter’s memory and integration with PC software additionally extends the functionality of the instruments.

Standards:

The tester can be used to test the equipment performance in accordance with standards:

• EN 50699:2021 Recurrent tests of electrical equipment
• EN 60745-1 Hand-held motor-operated electric tools. Safety. General requirements
• EN 61029 Safety of transportable motor-operated electric tools - General requirements
• EN 60335-1 Household and similar electrical appliances -Safety - Part 1: General requirements
• EN 60950 Safety of information technology equipment (IT Equipment)
• AS/NZS 3760:2010 In-service safety inspection and testing of electrical equipment
• VDE 0404-1 Prüf- und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 1: Allgemeine Anforderungen
• VDE 0404-2 Prüf- und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 2: Prüfeinrichtungen für Prüfungen nach Instandsetzung, Änderung oder für Wiederholungsprüfungen
• VDE 0701-0702 Prüfung nach Instandsetzung, Änderung elektrischer Geräte. Wiederholungsprüfung elektrischer Geräte. Allgemeine Anforderungen für die elektrische Sicherheit

Product Details:

The Sonel PAT-2 electrical equipment safety meter is an innovative combination of small dimensions (and the associated full mobility) with advanced measuring systems, allowing fully automatic measurements of electrical equipment, IEC cables and extension cords - also those with PRCD.

Features:

• LED test results indication
• quick access to the measurement procedures
• compact design and ergonomic soft case
• automatic measurement range selection
• measurement of protective conductor resistance with the currents: 200 mA
• insulation resistance measurement 500 V
• PRCD trip time testin
• measurement of equivalent, touch and differential leakage current
• measurement of mains voltage
• IEC lead test
• saving results to the memory
• printing labels with measurement results (option)
• works with software: Sonel Reader and Sonel PAT Analysis
• works with Sonel PAT Analysis Mobile application

Capabilities:

• The PAT-2 meter is an innovative combination of small dimensions (allowing full mobility) with advanced measuring systems, providing fully automatic measurements of electrical devices, IEC cables and extension cords - also those with PRCD.
• A set of tests is made with just one press of the START button. Configuration options allow to modify meter’s work mode, and thus - to better tailor it to user’s needs.
• PAT instrument is equipped with a manual measurement mode. It is useful in situations where individual test is sufficient instead of a complex measurement sequence.
• All instruments enable basic tests without external power supply: simplified test sets are available in battery mode.
• Small dimensions, light weight and a specially designed bag for the meter and accessories provide both convenience and high mobility. Wireless communication with the printer allows free measurement place arrangement without tangled wires. Meter’s memory and integration with PC software additionally extends the functionality of the instruments.

Standards:

The tester can be used to test the equipment performance in accordance with standards:

• EN 50699:2021 Recurrent tests of electrical equipment
• EN 60745-1 Hand-held motor-operated electric tools. Safety. General requirements
• EN 61029 Safety of transportable motor-operated electric tools - General requirements
• EN 60335-1 Household and similar electrical appliances -Safety - Part 1: General requirements
• EN 60950 Safety of information technology equipment (IT Equipment)
• AS/NZS 3760:2010 In-service safety inspection and testing of electrical equipment
• VDE 0404-1 Prüf- und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 1: Allgemeine Anforderungen
• VDE 0404-2 Prüf- und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 2: Prüfeinrichtungen für Prüfungen nach Instandsetzung, Änderung oder für Wiederholungsprüfungen
• VDE 0701-0702 Prüfung nach Instandsetzung, Änderung elektrischer Geräte. Wiederholungsprüfung elektrischer Geräte. Allgemeine Anforderungen für die elektrische Sicherheit

Product Details:

The innovative combination of small dimensions (full portability of the device) with advanced measuring systems allow to carry out fully automated measurements for electrical equipment, IEC cables and extension cords (including those with PRCD). The set of tests is performed with one click of START button. Configuration options of the meter allow you to modify the operation of the device, and thus, tailor it to the needs of the user. In situations, where it is necessary to perform simple and single measurement, without the need to do complex measurement procedure, Pat Sonel allow you to work in a single measurement mode of a given type (ie. Manual). All meters in this series (Pat) also allow you to make basic measurements without external power in emergency situations i.e. in the absence of the power one can easily run a simplified set of test in a battery mode.
Small size, weight, and specially designed carrying case of the meter and accessories provide comfort and high mobility. Wireless communication with a printer enables organization of the working site without the hassle of unnecessary cables. Storage and integration of the results in PC software further extends the functionality of the instrument.

MAIN FUNCTIONS PAT-10

• led test results indication
• quick access to the measurement procedures,
• measurement of protective conductor resistance with the currents: 200 mA, 10 A ,
• measurement of insulation resistance,
• PRCD trip time testing,
• measurement of equivalent, touch and differential leakage current,
• IEC lead test,
• measurement of mains voltage,
• internal results memory,
• automatic measurement range selection,
• compact design, ergonomic soft case,
• works with the program Sonel Reader and Sonel PAT (option).

Product Details:

The innovative combination of small dimensions (full portability of the device) with advanced measuring systems allow to carry out fully automated measurements for electrical equipment, IEC cables and extension cords (including those with PRCD). The set of tests is performed with one click of START button. Confi guration options of the meter allow you to modify the operation of the device, and thus, tailor it to the needs of the user. In situations, where it is necessary to perform simple and single measurement, without the need to do complex measurement procedure, Pat Sonel allow you to work in a single measurement mode of a given type (ie. Manual). All meters in this series (PAT) also allow you to make basic measurements without external power in emergency situations i.e. in the absence of the power one can easily run a simplifi ed set of test in a battery mode.
Small size, weight, and specially designed carrying case of the meter and accessories provide comfort and high mobility. Wireless communication with a printer enables organization of the working site without the hassle of unnecessary cables. Storage and integration of the results in PC software further extends the functionality of the instrument.

MAIN FUNCTIONS PAT-2

• led test results indication
• quick access to the measurement procedures,
• measurement of protective conductor resistance with the currents: 200 mA,
• measurement of insulation resistance,
• PRCD trip time testing,
• measurement of equivalent, touch and differential leakage current,
• IEC lead test,
• measurement of mains voltage,
• internal results memory,
• automatic measurement range selection,
• compact design, ergonomic soft case,
• works with the program Sonel Reader and Sonel PAT (option).

Additional Information:

• Item Code: 2

Product Details:

The innovative combination of small dimensions (full portability of the device) with advanced measuring systems allow to carry out fully automated measurements for electrical equipment, IEC cables and extension cords (including those with PRCD). The set of tests is performed with one click of START button. Confi guration options of the meter allow you to modify the operation of the device, and thus, tailor it to the needs of the user. In situations, where it is necessary to perform simple and single measurement, without the need to do complex measurement procedure, Pat Sonel allow you to work in a single measurement mode of a given type (ie. Manual). All meters in this series (PAT) also allow you to make basic measurements without external power in emergency situations i.e. in the absence of the power one can easily run a simplifi ed set of test in a battery mode.
Small size, weight, and specially designed carrying case of the meter and accessories provide comfort and high mobility. Wireless communication with a printer enables organization of the working site without the hassle of unnecessary cables. Storage and integration of the results in PC software further extends the functionality of the instrument.

MAIN FUNCTIONS PAT-2E

• led test results indication
• quick access to the measurement procedures,
• measurement of protective conductor resistance with the currents: 200 mA,
• measurement of insulation resistance,
• PRCD trip time testing,
• measurement of equivalent, touch and differential leakage current,
• IEC lead test,
• measurement of mains voltage,
• internal results memory,
• automatic measurement range selection,
• compact design, ergonomic soft case,
• works with the program Sonel Reader and Sonel PAT (option).

Additional Information:

• Item Code: 2E