Cords And Cables Locators

Product Details:

Locate wires and cables The Sonel LKZ-720 cable and wire locator is a device consisting of the LKN-720 transmitter (4 pcs.) and the LKO-720 receiver. This instrument is dedicated to finding cables and other underground infrastructures. The LKZ-720 allows the location of both metallic objects (cables) and non-conductive objects (PVC pipes, concrete, etc.). The locator is mainly dedicated to use in the energy and installation industry, among others.

LKZ enables operation work with four transmitters at the same time. The multi-transmitter operation of the system enables precise location of breaks in an electric system and identify individual cores in the cable.

Features:

• Detection of wires and cables (live or not).
• Tracing underground cables.
• Tracing conductive water and heating pipelines.
• Flow and accurate locating the object.
• Phase detection mode.
• Operation in wide range of rated voltage, up to 500 V RMS.
• Five modes of wire tracer operation: voltage, current, current-voltage, power and clamp.
• Additional accessories enable precise localization - such as contact or non-contact probes and measurement clamp.

Special features:

LKO-720

• Receiver operation with max. 4 transmitters at the same time to locate interruptions or distinguish wires.
• Receiving status information from the LKN-720 transmitter.
• The function 3D - detecting the direction of current.
• A LED torch.
• Headphone socket.
• Software upgrade via USB.
• Screen backlight for work in dark.

LKN-720

• 4 codes of the transmitted signal.
• Transmission of information about the transmitter settings and battery charge level.
• Measurement of voltage at the object to 500 V RMS.
• Three levels of amplification.
• Automatic or manual selection of operation modes.
• Screen backlight for work in dark.

Application:

Detection and tracing cables in ceilings, walls and floors

In response to the needs of customers, the LKO-720 has a specially designed 3D antenna that raises the precision of the wire tracing. Determine direction of wires in concrete up to 5 cm will not be a problem now.

Multi-transmitter operation

LKZ enables operation work with four transmitters at the same time. The multi-transmitter operation of the system enables precise location of breaks in an electric system and identify individual cores in the cable or cables in a trench.

Locating power points and switches in buildings

Specially modulated and coded signal generated by the LKN-720 transmitter allows to locate and identify sockets and switches in energized and de-energized circuits.

Identification of fuses on the distribution board

Thanks to the precise sensor in LKO-720 and additional contact and non-contact probes, identify of breakers and fuses now will be easily and time-saving.

Possibility to tracing in no access conductors

LKO-720 with C-8 clamp used in the current mode or in other mode forcing current flow, allows to uniquely identify wire or cable with no physical connection to it.

Non-contact detection of live cables

LKO-720 allows to precisely detect energized wires in air and concrete without additional probes.

Additional areas of use:

• detection of breaks in cables and wires
• locating short circuits between leads
• tracing shielded cables
• tracing cables in metal ducts
• tracing underground cables
• tracing conductive water and heating pipelines

Product Details:

Locate wires and cables The Sonel LKZ-720 cable and wire locator is a device consisting of the LKN-720 transmitter and the LKO-720 receiver. This instrument is dedicated to finding cables and other underground infrastructures. The LKZ-720 allows the location of both metallic objects (cables) and non-conductive objects (PVC pipes, concrete, etc.). The locator is mainly dedicated to use in the energy and installation industry, among others.

Features:

• Detection of wires and cables (live or not).
• Tracing underground cables.
• Tracing conductive water and heating pipelines.
• Flow and accurate locating the object.
• Phase detection mode.
• Operation in wide range of rated voltage, up to 500 V RMS.
• Five modes of wire tracer operation: voltage, current, current-voltage, power and clamp.
• Additional accessories enable precise localization - such as contact or non-contact probes and measurement clamp.

Special features:

LKO-720

• Receiver operation with max. 4 transmitters at the same time to locate interruptions or distinguish wires.
• Receiving status information from the LKN-720 transmitter.
• The function 3D - detecting the direction of current.
• A LED torch.
• Headphone socket.
• Software upgrade via USB.
• Screen backlight for work in dark.

LKN-720

• 4 codes of the transmitted signal.
• Transmission of information about the transmitter settings and battery charge level.
• Measurement of voltage at the object to 500 V RMS.
• Three levels of amplification.
• Automatic or manual selection of operation modes.
• Screen backlight for work in dark.

Application:

Detection and tracing cables in ceilings, walls and floors

In response to the needs of customers, the LKO-720 has a specially designed 3D antenna that raises the precision of the wire tracing. Determine direction of wires in concrete up to 5 cm will not be a problem now.

Multi-transmitter operation

LKZ enables operation work with four transmitters at the same time. The multi-transmitter operation of the system enables precise location of breaks in an electric system and identify individual cores in the cable or cables in a trench.

Locating power points and switches in buildings

Specially modulated and coded signal generated by the LKN-720 transmitter allows to locate and identify sockets and switches in energized and de-energized circuits.

Identification of fuses on the distribution board

Thanks to the precise sensor in LKO-720 and additional contact and non-contact probes, identify of breakers and fuses now will be easily and time-saving.

Possibility to tracing in no access conductors

LKO-720 with C-8 clamp used in the current mode or in other mode forcing current flow, allows to uniquely identify wire or cable with no physical connection to it.

Non-contact detection of live cables

LKO-720 allows to precisely detect energized wires in air and concrete without additional probes.

Additional areas of use:

• detection of breaks in cables and wires
• locating short circuits between leads
• tracing shielded cables
• tracing cables in metal ducts
• tracing underground cables
• tracing conductive water and heating pipelines

Product Details:

Easily locate cables and pipes with pinpoint accuracy.
The complexity of large underground utilities networks is continually increasing. So obtaining precise information on the location of specific buried cables and pipes has never been so important in order to protect burried assets during ground excavation work and supporting the mapping and surveying of these existing utilities.

Sonel LKZ-2000 system has a unique flexible operating modes to help you easily decide the right mode for your locating application and site conditions. The intelligent utility locator monitors the signal interference levels in all available modes and recommends which to use for the best results. Saving you time and giving you increased confidence in your results.

Sonel LKZ-2000 - the best system for most challenging conditions!

Power Industry:

• Sonel LKZ-2000 is designed to easily trace power cables over long and short distances with pinpoint accuracy, especially in areas with high levels of electrical interference. When used in conjunction with the supplied Multi Clamp a trace signal can be safely applied to an electrically live cable. The A-Frame accessory can also be used to easily locate cable sheath faults.

Civil Engineering And Construction Industries:

• The highly durable, weatherproof Sonel LKZ system has a flexible operating system to suit most site conditions and terrain, which is essential on complex and demanding civil engineering and construction sites.

• Damaging communication cables can be very costly and time consuming to repair, causing major disruption to the rail network. Sonel LKZ system is designed to easily locate and trace cables in congested areas and with high levels of electrical interference.

Telecom Industry:

• Tracing and locating large bundled cables, such as fibre optic cables, can be difficult and time consuming. Sonel LKZ systems high frequency modes are ideally suited for these types od cables, helping to improve your productivity and locating reliability of all cable types. The A-Frame accessory can be used to easily locate cable sheath faults.

Gas & Oil Industries:

• These can be the most potentially hazardous, costly or environmentally sensitive pipes to strike and therefore most important not to damage. Using the Sonel LKZ system’s range of low frequency modes, locating and tracing these pipes is easy over long distances, maintaining maximum accuracy.

Water Industry:

• Locating and tracing pipes can support the mapping and surveying of utilities. Using the Sonel LKZ system with our dual frequency sonde is the ideal solution for locating deep underground non-metallic sewerage and drainage pipes, that can’t be detected using standard locating technology.

Additional Information:

• Item Code: 2000

Product Details:

Wire tracer LKZ-700 is designed for detecting of cables and conductors in various environments (concrete, brick, wood, ground) being under voltege, without the need to disconnect any devices from tested network, as well as in non-voltage environments. The range of instrument application is very wide and the most common applications are as follows:

• detection of conductors in ceilings, walls and floors,
• location of breaks in cables,
• location of switches and fuses,
• location of the routes of shorted circuits,
• llocation of earth cables failure in installation
• possibility to detect illegal power consumption,
• tracing of underground cables course, to the depth of 2 m,
• tracing of conducting pipes in water or heating pipelines,
• identification of cables in installation.

LKZ-700 (package: transmiter + receiver) -> index: WMGBLKZ700
LKO-700 reciver -> index: WMGBLKO700
LKN-700 transmitter -> index: WMGBLKN700

Product Details:

Diagnose faults with TDR-420

The TDR-420 reflectometer is a handy digital Time Domain Reflectometer (TDR) designed to characterize and locate faults in power and telecommunications cables. The Sonel TDR-420 reflectometer allows to measure the length of the cable and to determine the distance to the damage or impedance change in the range from 4 to 6000 m in cables with metal conductors. The shortest measuring range of 7 meters and the dead zone of 0.6 m allows user to locate a damage in a very short distance from the connection point of the device.

Product features:

• fault location in power and telecommunication cables
• two independent cursors to indicate two fault locations and the distance between them
• fault location in coaxial cables
• fault location in infrastructure cables
• detection of breaks, short-circuits, damage caused by moisture and other changes in cable impedance
• graphic presentation of cable faults with an indication of the distance to the fault on the display

Application:

TDR-420 time-domain reflectometer is designed to detect where faults in metal wires are. This product is designed for:

• electrical wholesalers and cable dealers,
• electrical installation companies,
• maintenance personnel at manufacturing plants,
• building personnel.

This device meets the expectations of all those who have to accurately locate a fault and wire end in either power or telecommunications cables.

Device capabilities:

• SONEL reflectometer is distinguished for their long operating range of up to 6,000 m, very low margin of error in measurement (in the order of 1%) and the ability to adjust both the velocity of propagation and the impedance of the cable which is under investigation. By using two cursors there should be no problem with determining both the distance to two faults and the distance between them.

Easy readout:

• The TDR-420 reflectometer is equipped with a readable colour display that, due to its 320 x 240 pixel resolution, allows the fault location to be indicated even more accurately.

Integrated Help:

• In the TDR-420 device a handy help function has been added to facilitate the interpretation of the result obtained during measurement. Thanks to this function, a user can quickly determine the type of anomaly that is present in the cable segment which is being examined, by comparing the displayed reflectogram with typical fault shapes.

Durable and practical casing:

• In response to the customers needs the new TDR-420 model has been designed to operate in difficult environmental conditions. A unique casing with the IP67 ingress protection rating ensures that the device is both waterproof and dustproof. An additional advantage is the elastomer coating of the casing that prevents the device from slipping out of the hands and provides protection if it should be accidently dropped.

Product Details:

Diagnose faults with TDR-410

The Sonel TDR-410 reflectometer is designed to locate faults in metallic cables. The product is dedicated to electrical wholesalers and cable retailers, electrical installation companies, maintenance workers in production plants and construction personnel. It meets the expectations of all those who need to find the exact location of the damage and the end of the cable in both power and telecommunications cables.

Product features:

• fault location in power and telecommunication cables
• fault location in coaxial cables
• fault location in infrastructure cables
• detection of breaks, short-circuits, damage caused by moisture and other changes in cable impedance
• graphic presentation of cable faults with an indication of the distance to the fault on the display

• SONEL reflectometer is distinguished for their long operating range of up to 4,000 m, very low margin of error in measurement (in the order of 1%) and the ability to adjust both the velocity of propagation and the impedance of the cable which is under investigation. 

Product Details:

LKO-1500-LITE receiver is designed according to “intuitive and user-friendly” principle and it is an ideal solution for users entering the world of cable location and routing.

LKO-1500-LITE receiver

• Active mode:
  • work with LKN-1500 transmitter at the frequencies of 1024 Hz, 8928 Hz, 33 kHz.
• Passive mode – work at the frequencies of:
  • 50 Hz,
  • RADIO (10...36 kHz),
  • SB (48 Hz...14 kHz).
• Location depth up to 6 m.

Product Details:

Cable routing without secrets due to LKZ-1000
The Sonel LKZ-1000 cable and wire locator is a device dedicated to finding cables and other underground infrastructures. The whole device set consists of a transmitter, receiver and accessories enabling users to detect and locate both metallic objects (cable) and other non-conductive system elements (e.g. PVC pipelines, concrete pipes, etc.). Only the receiver or the receiver and transmitter can be used (selective modes). When working with the transmitter, the depth of the object is additionally measured.

Cable routes without secrets thanks to LKZ-1000

Features:

• Backlit LCD with contrast (auto on-off).
• Automatic adjustment of detection sensitivity.
• 5 operating modes.
• Warning about shallowly located cables.
• Measuring cable locations up to 3 m deep.
• Determining the direction of a cable.
• Sound signals to facilitate locating or tracing.
• Adjustment of power and selection of frequencies for the transmitter.
• Passive or active modes of tracing. • Detection of underground live wires.
• Detection of underground wires with no voltage (radio mode).
• Detection of underground wires with no voltage using a transmitter (galvanized, inductive or clamp-based connection).
• Tracing metallic or non-conductive pipes using an additional probe.
• Tracing non-conductive pipelines using a “floating” probe.
• Tracing a determined cable.
• Determining the depth of a cable.

Characteristics:

Improved LKN-1000 transmitter delivers significantly higher power than previous model, which allows to:

• Tracking underground services over a, longer distances,
• Improve service detection in areas of high signal interference,
• Improve depth estimation.

Other benefits of the new transmitter:

• four adjustable output levels with maximum output level, of 1 W,
• durable waterproof design environmental protection rating of IP65,
• smaller and lighter designed to work in harsh conditions,
• choice of 3 tracing signals, 8 kHz or 33 kHz, in conductive mode 8 kHz and 33 kHz at the same time,
• clear visual and visual signals for easier operation,
• built-in test function – allowing operators to test the hardware and software functionality of the LKN-1000 before use,
• externally located control buttons, ensure a waterproof.

Operating modes:

• Passive, with 50 Hz or 60 Hz – enables to locate live wires and cables (POWER).
• Passive RADIO (15-30 kHz) – enables a quick, non-selective locating operation for an underground structure (metallic installations).
• Active (with transmitter) (8 kHz and 33 kHz), enables:
  • a locating operation using the inductive mode (all one has to do is to place the transmitter over the object traced),
  • a locating operation through connecting the transmitter directly to an object that is not live,
  • a locating operation using transmission clamps (it is necessary to close the clamps over the object tested),
  • a locating operation using a transmission wire or transmission probes (enables to locate non-metallic objects),
  • a locating operation sing a separating adapter (connecting the transmitter LKN-1000 directly to a 230 V socket)

Product Details:

Special Features:

• 4 codes of the transmitted signal.
• Transmission of information about the transmitter settings and battery charge level.
• Measurement of voltage at the object to 500 V RMS.
• Three levels of amplification.
• Automatic or manual selection of operation modes.
• Screen backlight for work in dark.

Application:

• Locating power points and switches in buildings
• Specially modulated and coded signal generated by the LKN-720 transmitter allows to locate and identify sockets and switches in energized and de-energized circuits.

Product Details:

Characteristics:

Improved LKN-1000 transmitter delivers significantly higher power than previous model, which allows to:

• Tracking underground services over a, longer distances,
• Improve service detection in areas of high signal interference,
• Improve depth estimation.

Other benefits of the new transmitter:

• four adjustable output levels with maximum output level, of 1 W,
• durable waterproof design environmental protection rating of IP65,
• smaller and lighter designed to work in harsh conditions,
• choice of 3 tracing signals, 8 kHz or 33 kHz, in conductive mode 8 kHz and 33 kHz at the same time,
• clear visual and visual signals for easier operation,
• built-in test function – allowing operators to test the hardware and software functionality of the LKN-1000 before use,
• externally located control buttons, ensure a waterproof.

Product Details:

Features:

• Operating frequencies: 512 Hz, 3140 Hz, 8192 Hz, 32768 Hz, 83,1 kHz, 200 kHz
• Output power control: 5 levels
• Power in induction mode (max): 3 W
• Power for galvanic connection (max): 12 W (for impedance of connected object: 100 Ω)
• Batteries: up to 100 hours (level 2 output power at 20°C)
• Auto-OFF: Capability of selecting auto-OFF time, after 1, 2, 3, 4, 5, 6, 7, 8 hours

Product Details:

Special features:

• 4 codes of the transmitted signal.
• Transmission of information about the transmitter settings and battery charge level.
• Measurement of voltage at the object to 500 V RMS.
• Three levels of amplification.
• Automatic or manual selection of operation modes.
• Screen backlight for work in dark.

Application:

• Locating power points and switches in buildings
• Specially modulated and coded signal generated by the LKN-720 transmitter allows to locate and identify sockets and switches in energized and de-energized circuits.

Product Details:

Special features:

• Receiver operation with max. 4 transmitters at the same time to locate interruptions or distinguish wires.
• Receiving status information from the LKN-720 transmitter.
• The function 3D - detecting the direction of current.
• A LED torch.
• Headphone socket.
• Software upgrade via USB.
• Screen backlight for work in dark.

Application:

• Detection and tracing cables in ceilings, walls and floors
• In response to the needs of customers, the LKO-720 has a specially designed 3D antenna that raises the precision of the wire tracing. Determine direction of wires in concrete up to 5 cm will not be a problem now.
• Identification of fuses on the distribution board
• Thanks to the precise sensor in LKO-720 and additional contact and non-contact probes, identify of breakers and fuses now will be easily and time-saving.
• Possibility to tracing in no access conductors
• LKO-720 with C-8 clamp used in the current mode or in other mode forcing current flow, allows to uniquely identify wire or cable with no physical connection to it.
• Non-contact detection of live cables
• LKO-720 allows to precisely detect energized wires in air and concrete without additional probes. 

Product Details:

Features:

• Mode / Frequency: POWER passive mode: 50 Hz, 100 Hz, 450 Hz / 60 Hz, 120 Hz, 540 Hz, RADIO passive mode: 15 kHz to 60 kHz, Active mode (with transmitter): 512 Hz, 3140 Hz, 8192 Hz, 32768 Hz and 83.1kHz
• Antenna configuration: Single peak value, double peak value, neutral point, full field
• Depth measurement range: POWER mode up to 3 m., RADIO mode up to 2 m., modes with active transmitter up to 4.6 m., probe mode up to 6 m
• Accuracy of measurement (error): 5% depth in linear or probe mode (from 0.2 m to 4.6 m.), 10% depth in probe mode (from 4.6 m to 6 m).
• Bluetooth: for remote transmitter control
• Batteries: 2 x LR20
• Operating time with battery power for LKO: up to 60 hours (at 20°C)
• Auto-OFF: Capability of selecting auto-OFF time after 5, 10, 20 or 30 minutes